CW users
2018-05-25 18:38
CW users,
I often work on CW mode at HamSphere frequencies
40m 7.020
30m 10.120
20m 14.220
17m 18.120
Your answer at my call will be appreciate and I'll do QSO with very pleasure.
Thanks and 73'. Angelo I0RNK
Re: CW users
2018-05-28 12:13
Angelo, I’ll look for you on those frequencies. I am usually active on those frequencies +/-5khz with following schedule Monday thru Friday 1300-1400 & 0200-0400UTC; Saturday & Sunday 1300-1500, 2200-0000, 0200-0400. Depending on propagation between North America and Europe we should be able to make a few QSOs. I use the vertical collinear or the Omnidx antenna to send the signal. Take care & hope to hear you on CW!

73,

KD6KA - Mike
Re: CW users
2018-05-28 12:53
Hi Mike,

Thanks for info. About the antennas of HamSphere, I can use VU2NSB (10-80m) and IDC vertical (10-160m).
I hope to hear your signal when there will be the propagation between USA and Europe. 73'

Angelo I0RNK
Re: CW users
2018-05-29 02:33
Hello Angelo,

I checked the VOACAP website http://www.voacap.com/p2p/index.html and found out that the best time for a CW QSO between US and Italy is 20 meters at 2200UTC and 30 meters between 0300 - 0600UTC. I'll look for you on the frequencies you mentioned above at those times. Take care and 73!

KD6KA - Mike
Re: CW users
2018-08-21 16:33
Dear Angelo,
It'll be a pleasure to answer to your call but I don't know how to plug my key to HAMSPHERE.

73
EA3IBI - Oscar
Re: CW users
2018-08-22 09:36
Dear Oscar
I have the transceiver behind the computer. The key is plugged on the radio. So I can use the key to produce dots and dashes with the keyer. The radio doesn't go on transmission because the BK-IN is off. I can hear the sound of the radio during my manipolation of the key and the sound is captured from microphone of the computer.
No connection betwen radio and computer or betwen key and computer.
By the way my omputer is ASUS VivoBook Max.
I hope my answer is helpful to you. 73 Angelo I0RNK
Re: CW users
2018-08-23 08:55
Hi Angelo,
Ok, I understood. I’ll try that system. I have a PALM PICO PADDLE, it has a sound, not too high but probably enough to be heard from my YETI microphone.

Thank U 73
EA3IBI - Oscar
Re: CW users
2018-09-16 18:13
Hi to all de TA/YI1RZ

How can i use CW on hamsphere 4 ??

Thanks for all
Best regards
Razi - TA/YI1RZ
73
Re: CW users
2018-09-17 14:48
Hello Razi
If you have got you transceiver with the keyer inside, near the computer, you have to plug the key on radio to do the dots and the dashes. The BN-IN of the transceiver must be off. So you can hear the sound during manipolation of you key and the sound is captured from microphone of computer or you have to send it through the microphone. 73' Angelo I0RNK
Re: CW users
2019-07-23 18:46
Could someone enlighten us to neophytes how to use iambic handler b in hamsphere 4.0?
Re: CW users
2020-03-15 03:01
I am QRV on CW. Any sked welcome. I am also on other Digimodes too.
Best 73
de arasu vu2ur
Sorry, only registered users may post in this forum.

Click here to login